Enhanced photo-electrochemical activity of ZnO/Cu2S nanotube arrays photocathodes

ZnO/Cu₂S nanotube arrays are fabricated firstly by a facile and capping-agent-free method, and the photo-electrochemical performance has been studied systematically. The results show that ZnO/Cu₂S nanotube arrays achieve enhanced photo-electrochemical water splitting performance and the photocurrent densities of ZnO/Cu₂S are 7.9 times than that of ZnO at 0 V versus Ag/AgCl. The performance of the ZnO/Cu₂S nanotube arrays can be adjusted by changing the amount of Cu₂S microcrystals. The results confirm that the enhanced photo-electrochemical performance of ZnO/Cu₂S is due to the significantly improved visible light absorption, effective separation of photo-induced carriers due to the well band energy match and the formed p-n junction between ZnO and Cu₂S.     

Adaptive compensation of persistent actuator failures of nonlinear systems

In this article, adaptive compensation designs are developed for nonlinear systems with uncertainties from the system functions and persistent actuator failures of characterizations that (i) some unknown system inputs are stuck at some unknown fixed or varying values at unknown time instants and (ii) the failure pattern always switches from one to another and the switching does not stop. Such a controlled plant is described by an uncertain time-varying nonlinear system, and some robust adaptive feedback linearization based failure compensation results are studied for closed-loop system stabilization and bounded output tracking for some specific conditions. To improve the tracking performance in the presence of persistent actuator failures, a new adaptive control scheme is developed, using the failure indicator function which contains the failure pattern and failure time in the formulation. Detailed stability and tracking performance are shown. Simulation results are shown to verify the effectiveness of the proposed adaptive actuator failure compensation method.     

Extraction and characterisation of pectin polysaccharide from soybean dreg and its dispersion stability in acidified milk drink

In this study, pectin polysaccharide (SDPP) was obtained from soybean dreg (26.2% yield), and characteristics of SDPP were compared with those of soybean soluble polysaccharides (SSPS) and citrus pectin (HMP). The galacturonic acid and molecular weight of SSPS, SDPP or HMP were 11.8%, 40.6% or 70.2% and 112, 446, or 440 kDa. SDPP had similar viscosity and protein content to SSPS, and functional groups and linear structure to HMP. SSPS, SDPP or HMP differed in particle size of 260, 467 or 1195 nm and ζ–potential of −5.8, −14.6 or −23.5 mV at pH 4.0. The precipitation of acidified milk drink (AMD) was 6.31% without stabiliser or below 1.75% with 0.4% SDPP at pH 3.6–4.6. These results suggested that SDPP combines the structure and characteristic of HMP and SSPS, and AMD with SDPP had great stabilising behaviour at wider pH range (pH 3.6–4.6).     

Combining molybdenum carbide with ceria overlayers to boost Mo/CeO2 catalyzed ammonia synthesis

The design of an efficient non-noble metal catalyst is of burgeoning interest for ammonia synthesis. Herein, we report a Mo₂C/CeO₂ catalyst that is superior in ammonia synthesis activity. In this catalyst, molybdenum carbide coexisted with the ceria overlayers which is from the ceria support as the strong metal–support interaction. There is a high proportion of low-valent Mo species, as well as high concentration of Ce³⁺ and surface oxygen species. The presence of Mo₂C and CeO₂ overlayers not only leads to enhancement of hydrogen and nitrogen adsorption, but also facilitates the desorption and exchange of adsorbed species with the gaseous reagents. Compared with the Mo/CeO₂ catalyst prepared without carbonization, the Mo₂C/CeO₂ catalyst is more than sevenfold higher in ammonia synthesis rate. This work not only presents an explicit example of designing Mo-based catalyst that is highly efficient for ammonia synthesis by tuning the adsorption and desorption properties of the reactant gases, but opens a perspective for other elements in ammonia synthesis.     

HPCL法测定左亚叶酸钠的异构体

目的:常用的亚叶酸类制剂包括亚叶酸钙、亚叶酸钠及其他们的左旋单体左亚叶酸钙、左亚叶酸钠,亚叶酸类制剂在体内真正起活性作用的部分为左亚叶酸.在制备中一般通过2种单体成盐时不同溶解度进行分离,但现有测定含量的检测方法均无法分离左旋或右旋单体,容易造成含量测定误差.结论:因此我们用HPLC法对注射用左亚叶酸钠异构体测定方法进行了研究,该法测定重复性好,结果准确可靠.     

Enhanced photoreactivity of MOFs by intercalating interlayer bands via simultaneous ?NCO and ?SCu modification

Herein, we propose a novel method to enhance the photoreactivity of an MOF catalyst by grafting isocyanate bonds ( NCO) and sulfhydryl-complexed copper ( SCu) onto ZIF-8 (NIF-SCu). The grafting process intercalated interlayer bands between the conduction and valence bands of ZIF-8, thereby providing a “ladder” for facile electron transition. The extreme improvement in the photoreactivity of NIF-SCu could be attributed to the enhancement in light responses in the range of 350–450 nm by  NCO groups and the widening of the visible light range of the MOF by  SCu groups. The formation of staggered energy levels in NIF-SCu could also narrow the band gap, lower the resistance, and facilitate the transfer of photogenerated carriers, thereby generating electrons with strong reduction potential in the  SCu conduction band. This study provides a new strategy for improving or even endowing the photoactivity of environmental functional materials with wide bandgaps.     

Tuning the magnetic properties of Zr2N MXene by biaxial strain

The effects of strain on the magnetic properties of Zr₂N MXene have been investigated by the first-principles calculations. The ground state of strain-free Zr₂N MXene is intrinsically antiferromagnetic. However, the magnetic state of Zr₂N MXene tends to be ferromagnetic when the applied strain is higher than 4%. The transition of magnetic orderings from antiferromagnetism to ferromagnetism under tensile strains can be understood from the Stoner criterion. Besides, the critical temperature (T_c) is about 470 K for the strain-free Zr₂N MXene, indicating that the antiferromagnetic ordering can be robust and maintained at room temperature. The T_c of antiferromagnetic states begins to decrease once the strain is exerted. As the FM ordering is favored, however, the T_c then increases with the applied strain. Under 8% tensile strain, the T_c comes to room temperature (300 K). In addition, both the orientation of easy-axis and the magnetic anisotropy energy (MAE) of Zr₂N MXene fluctuate with the strain. At the strain of 2%, the MAE reaches the largest (203 μeV per Zr atom), mainly resulting from the spin-orbit interactions between occupied and unoccupied p_x/p_y states of Zr atoms. All these tunable and appealing properties make Zr₂N MXene desirable for spintronic applications.     

Rational Designs for Lithium-Sulfur Batteries with Low Electrolyte/Sulfur Ratio

Lithium-sulfur batteries (LSBs) are considered a promising next-generation energy storage device owing to their high theoretical energy density. However, their overall performance is limited by several critical issues such as lithium polysulfide (PS) shuttles, low sulfur utilization, and unstable Li metal anodes. Despite recent huge progress, the electrolyte/sulfur ratio (E/S) used is usually very high (≥20 µL mg⁻¹), which greatly reduces the practical energy density of devices. To push forward LSBs from the lab to the industry, considerable attention is devoted to reducing E/S while ensuring the electrochemical performance. To date, however, few reviews have comprehensively elucidated the possible strategies to achieve that purpose. In this review, recent advances in low E/S cathodes and anodes based on the issues resulting from low E/S and the corresponding solutions are summarized. These will be beneficial for a systematic understanding of the rational design ideas and research trends of low E/S LSBs. In particular, three strategies are proposed for cathodes: preventing PS formation/aggregation to avoid inadequate dissolution, designing multifunctional macroporous networks to address incomplete infiltration, and utilizing an imprison strategy to relieve the adsorption dependence on specific surface area. Finally, the challenges and future prospects for low E/S LSBs are discussed.     

Remarkable Antibacterial Activity of Reduced Graphene Oxide Functionalized by Copper Ions

Despite long-term efforts for exploring antibacterial agents or drugs, potentiating antibacterial activity and meanwhile minimizing toxicity to the environment remains a challenge. Here, it is experimentally shown that the functionality of reduced graphene oxide (rGO) through copper ions displays selective antibacterial activity that is significantly stronger than that of rGO itself and no toxicity to mammalian cells. Remarkably, this antibacterial activity is two-orders-of-magnitude greater than the activity of its surrounding copper ions. It is demonstrated that rGO is functionalized through the cation–π interaction to massively adsorb copper ions to form a rGO–copper composite and result in an extremely low concentration level of surrounding copper ions (less than ≈0.5 µm ). These copper ions on rGO are positively charged and strongly interact with negatively charged bacterial cells to selectively achieve antibacterial activity, while rGO exhibits the functionality to not only actuate rapid delivery of copper ions and massive assembly onto bacterial cells but also result in the valence shift in the copper ions from Cu²⁺ into Cu⁺, which greatly enhances the antibacterial activity. Notably, this rGO functionality through cation–π interaction with copper ions can similarly achieve algaecidal activity but does not exert cytotoxicity against neutrally charged mammalian cells.